The Best Barn Paint you will ever use. A decorative Barn Paint covering for nearly all building surfaces and it's lovely to use and apply with great coverage, no primer needed and low odour. We even add an antimicrobial additive to stop mould growth and moss formation. Coats Wood, Brickwork, Masonry, Render, Asbestos, Iron, Steel, Aluminium, Galv, Lead, Most Plastics and Melamines. Apply by brush or roller. No primer or undercoat required. For pourous surfaces you may thin the first coat down with 10% water. The substrate must be sound, dry and free from oil and grease. Surfaces which are contaminated with lichen or moss should be brushed clean, treated with Anti-Fungal Wash and allowed to dry. Any structural repairs should be carried out before application of BARN PAINT. Plastic, metal and timber surfaces should be rubbed down with abrasive paper prior to application Apply by Brush or Roller. No primer or undercoat is necessary unless used on ferrous metal or where staining could occur. Do not apply at temperatures below 8ºC. Coverage: Approximately 13-15 sq. metres/litre, depending on texture and porosity of substrate. Drying: Normally re coat able after 4 hours (if required). Ensure good ventilation during application and drying. Clean up: Warm soapy water. Storage: Protect from frost. Keep out of reach of children. ● TekTor BARN PAINT is Non-flammable . The shades on the colour chart can be affected by your PC monitor. So advisable to test a small are first.. We are an independent coatings manufacturer who make quality products with care and attention. IF YOU REQUIRE A SPRAY VERSION PLEASE SEND A MESSAGE 1st BEFORE BUYING OR RING US ON 01604 781702 kovertek.com Distributors & Stockist Enquiries welcomed Across UK & Europe. The finish of our barn paint is a satin type matt not dead matt
Trustpilot
2 months ago
3 days ago